F303 Low Cost Axial Force Sensor
Standard Ranges 20 and 40kN (2 and 4tonnef)
- Low profile
- Sealed to IP65
- Low cost
- Hardened stainless steel
- Standard 1 year warranty
Non-linearity - Terminal
Creep - 20 minutes
Rated output - Nominal
Rated output - Rationalised
Zero load output
Temperature effect on rated output per Â°C
Temperature effect on zero load output per Â°C
Temperature range - Compensated
-10 to +50
Temperature range - Safe
-10 to +80
Excitation voltage - Recommended
Excitation voltage - Maximum
Insulation resistance - Minimum at 50Vdc
Overload - Safe
Overload - Ultimate
Weight - Nominal (excluding cable)
All standard ranges are manufactured in stainless steel.
The F303 is aimed at the volume OEM user who requires a reliable high quality axial sensor at a low price for low accuracy compressive force measurement in equipment.
It is manufactured from stainless steel and sealed to IP65 for long life in typical industrial operating conditions. The sensor is designed for simple mounting on a smooth flat surface.
Each sensor is labelled with its output for full range. A calibration certificate is not supplied as standard.
We are happy to design variants of this loadcell to meet your specific requirements. Please consult our engineering department.
Compression, IP65, unrationalised
Compression, IP65, rationalised
Structural Stiffness - Nominal
9.9 x 108
2.1 x 1010
- AL = Applied load.
- RL = Rated load.
- Temperature coefficients apply over the compensated range.
- The load must be applied directly through the central loading axis.
The loadcell is fitted with 2 metres of PVC insulated 4 core screened cable type 7-2-4C.
Excitation + = Red, Excitation - = Blue, Signal + = Yellow, Signal - = Green, Screen = Orange.
The screen is not connected to the loadcell body.
When this loadcell is rationalised the resistors are housed in a capsule located in the loadcell cable 100mm from the free end. Capsule dimensions are Ø10mm by 57mm.