Manufacturing loadcells since 1972
F323 Clutch Pedal Force Loadcell
Standard Range 1kN (100kgf)
The F323 is a compact, high accuracy low profile loadcell for measuring clutch pedal application forces. The loadcell is robust in construction with a maximum force range of 1kN (100kgf). Its multi-hole fixing allows simple attachment to any shape pedal using screws or cable ties. The low profile design maintains the clutch pedals ergonomic geometry. Low mass aluminium alloy construction reduces the mass influence upon the clutch pedal in dynamic testing.
If you require other force ranges the F304 or F322 may be suitable.
We are happy to design variants of this loadcell to meet your specific requirements.
Details of our other loadcell families can be found in the Product Guide.
|See the loadcell ordering code sheet for more details. Add range in the required force units.|
|F323CFR0KN||Compression, IP65, rationalised|
|Non-linearity - Terminal||±0.05||% RL|
|Creep - 20 minutes||±0.05||% AL|
|Rated output - Rationalised||2.0||mV/V|
|Rationalisation tolerance||±0.1||% RL|
|Zero load output||±10||% RL|
|Temperature effect on rated output per °C||±0.005||% AL|
|Temperature effect on zero load output per °C||±0.005||% RL|
|Temperature range - Compensated||-10 to +50||°C|
|Temperature range - Safe||-10 to +80||°C|
|Excitation voltage - Recommended||10||V|
|Excitation voltage - Maximum||20||V|
|Insulation resistance - Minimum at 50Vdc||500||MΩ|
|Inclined load error - concentric at 3°||±0.25||% RL|
|Structural stiffness||1.5 x 107||N/m|
|Overload - Safe||50||% RL|
|Overload - Ultimate||200||% RL|
|Sideload - Safe||100||% RL|
|Weight - Nominal (excluding cable)||80||g|
The standard range is manufactured in aluminium alloy.
The loadcell is fitted with 2 metres of flexible polyurethane jacketed 4 core screened cable.
Excitation + = Red, Excitation - = Blue, Signal + = Yellow, Signal - = Green, Screen = Orange.
The screen is not connected to the loadcell body.
When this loadcell is rationalised the resistors are housed in a capsule located in the loadcell cable 100mm from the free end. Capsule dimensions are Ø10mm by 57mm.
|Outline||Outline drawing of the product.|
|STEP file||STEP files for standard ranges.|
|Stock List||Loadcell availability.|
|Engineering||Engineering application sheet.|
|PDF data-sheet||Printable data-sheet. Right click on the link to download the file.|