Set-up Wheel Loadcell

• Ball transfer base
• Off axis loading compensation
• Capacity 250 or 500kg per wheel
• Standard 2 year warranty

This F256 loadcell assembly is designed specifically to be easily fitted to customer designed set-up wheels. Incorporating a ball transfer base means that the car can easily be positioned precisely in the workshop. Off axis loading due to camber angles are allowed for with the loadcells built in compensation. With the cable exiting through the loadstud and fitted with a connector, levelling of the wheel is achieved by rotation of the loadcell in the set-up wheel. With two loadcells fitted to each wheel, giving a capacity of up to 250kg or 500kg, typical accuracy is better than 0.25kg or 0.5kg (refer to F256 Data Sheet for full performance specification).

The loadcells can be used with your own workshop measuring equipment or we can supply TR150 or TR200/2 battery powered loadmeters. If you require signal conditioning to interface the loadcells to your workshop equipment the SY011, SY018 and SGA amplifiers are available with either voltage or current outputs.

Details of our loadcell families can be found in the Loadcell Specifier Guide.