Novatech F312 Custom Shear Pin Loadcell

We can manufacture shear pin loadcells to your specific requirements. If you fill in the blanks on the form below and send it to our sales department we will respond with a quotation, usually within 24 hours. If the standard value for any parameter is suitable you can leave the field blank. We need at least one contact number or email address to return the quotation!

Company:		Tel:
Contact:		Fax:
Quantity:		Email:

Required Dimensions (mm)
Ø		L1		L3		DEPTH
L		L2		L4		L5

Parameter	Standard Value	Unit
Load range	-	tonne
Non-linearity - Terminal	±0.1	% RL
Repeatability	±0.02	% RL
Rated output - Nominal	2.2	mV/V
Zero load output	±4	% RL
Temperature effect on rated output per °C	±0.005	% AL
Temperature effect on zero load output per °C	±0.005	% RL
Temperature range - Compensated	-10 to +50	°C
Temperature range - Safe	-10 to +80	°C
Excitation voltage - Recommended	10	V
Bridge resistance	350	Ω
Insulation resistance - Minimum at 50Vdc	500	MΩ
Overload - Safe	50	% RL
Overload - Ultimate	100	% RL
Sealing	IP65
Cable length	2	m

Delete all the information that you have entered so that you can start again.
Send the information to Novatech Measurements for a quotation.

**Notes**
AL = Applied load. RL = Rated load. Temperature coefficients apply over the compensated range.

Top