Novatech F311 Custom Static Torque Transducer

We can manufacture static torque transducers with ranges between 2Nm and 1000Nm to your specific requirements. For lower ranges please see the F315. If you fill in the blanks on the form below and send it to our sales department we will respond with a quotation, usually within 24 hours. If the standard value for any parameter is suitable you can leave the field blank. We need at least one contact number or email address to return the quotation!

Company:		Tel:
Contact:		Fax:
Quantity:		Email:

Parameter		Unit
Torque range		Nm
Non-linearity - Terminal		% RT

Additional requirements:

**Typical Specification**
Zero load output	±4	% RT
Temperature effect on rated output per °C	±0.005	% AT
Temperature effect on zero load output per °C	±0.01	% RT
Temperature range - Compensated	-10 to +50	°C
Temperature range - Safe	-10 to +80	°C
Sealing	IP65
Cable length	2	m

Delete all the information that you have entered so that you can start again.
Send the information to Novatech Measurements for a quotation.

Notes
AT = Applied torque. RT = Rated torque. Temperature coefficients apply over the compensated range.

Top

F311 Custom Static Torque Transducer

Notes