Novatech F245 Axial Compensated Loadcell

High accuracy
Compact axial geometry
Misalignment error compensation
Standard 2 year warranty
Low deflection at full load

F245 Axial Compensated Loadcell

Geometry: Flexure strain assembly in cylindrical housing, open or weather sealed with end internal fixing. For universal use in tension and compression, with compensation for off axis load inputs.

The F245 is ideally suited to low range engineering force measurements and process weighing. When precision and easy installation are required various configurations allow the loadcell to be used in both tensile and compressive applications.

We are happy to design variants of this loadcell to meet your specific requirements. Versions can be manufactured for higher temperature operation. Please consult our engineering department.

Details of our other loadcell families can be found in the Loadcell Specifier Guide.

**Ordering Codes**
See the loadcell ordering code sheet for more details. Add range in the required force units.
F245CF00H0	Compression, unrationalised	F245CF00HN	Compression, rationalised
F245TF00H0	Tension, unrationalised	F245TF00HN	Tension, rationalised
F245UF00H0	Bi-directional, unrationalised	F245UF00HN	Bi-directional, rationalised
Change the first 0 to an R for the IP65 version.

**F245 Specification**
Parameter	Value	Unit
Non-linearity - Terminal	±0.1	% RL
Hysteresis	±0.1	% RL
Creep - 20 minutes	±0.1	% AL
Repeatability	±0.02	% RL
Rated output - Nominal	2.2	mV/V
Rated output - Rationalised	2.0	mV/V
Rationalisation tolerance	±0.1	% RL
Zero load output	±4	% RL
Temperature effect on rated output per °C	±0.002	% AL
Temperature effect on zero load output per °C	±0.005	% RL
Temperature range - Compensated	-10 to +50	°C
Temperature range - Safe	-10 to +80	°C
Excitation voltage - Recommended	10	V
Excitation voltage - Maximum	10	V
Bridge resistance	350	Ω
Insulation resistance - Minimum at 50Vdc	500	MΩ
Overload - Safe	20	% RL
Overload - Ultimate	100	% RL
Weight - Nominal (excluding cable)	40 to 50	g

All standard ranges are manufactured in stainless steel.

**Structural stiffness - Nominal**
Range (N)	Stiffness (N/m)	Range (N)	Stiffness (N/m)	Range (N)	Stiffness (N/m)
100	3.2 x 10⁶	400	3.0 x 10⁶
200	6.4 x 10⁶	800	6.0 x 10⁶

Notes

AL = Applied load.
RL = Rated load.
Temperature coefficients apply over the compensated range.

Connections

The loadcell is fitted with 2 metres of PVC insulated 4 core screened cable type 7-2-4C.

Excitation + = Red, Excitation - = Blue, Signal + = Yellow, Signal - = Green, Screen = Orange.

Reverse the signal connections to obtain a positive signal in tension mode. The screen is not connected to the loadcell body.

**Additional Information**
Outline	Outline drawing of the product.
PDF data-sheet	Printable data-sheet. Right click on the link to download the file.

Top