Novatech F225 High Load Ultra Low Profile Loadcell

Ultra low profile
Fail-safe failure mode
Hardened stainless steel
IP67 sealing option
Standard 2 year warranty

F225 High Load Ultra Low Profile Loadcell

Geometry: Ultra low profile axial loadcell for use in force measurements in compression.

The ultra slim design provides for ease of installation beneath heavy machinery mounts, hydraulic rams or interposed within series mechanical compression assemblies.

In the event of structural failure of the loadcell the resulting vertical movement of the supported load including normal deflection will not exceed 2.5mm.

We are happy to design variants of this loadcell to meet your specific requirements. Please consult our engineering department.

Details of our other loadcell families can be found in the Loadcell Specifier Guide.

**Ordering Codes**
See the loadcell ordering code sheet for more details. Add range in the required force units.
F225CFR0H0	Compression, IP65, unrationalised	F225CFR0HN	Compression, IP65, rationalised
Change the R to an S for IP67 sealing.

**F225 Specification**
Parameter	Value	Unit
Non-linearity - Terminal	±0.5	% RL
Hysteresis	±0.5	% RL
Creep - 20 minutes	±0.05	% AL
Repeatability	±0.02	% RL
Rated output - Nominal	2.3	mV/V
Rated output - Rationalised	2.0	mV/V
Rationalisation tolerance	±0.5	% RL
Zero load output	±4	% RL
Temperature effect on rated output per °C	±0.005	% AL
Temperature effect on zero load output per °C	±0.005	% RL
Temperature range - Compensated	-10 to +50	°C
Temperature range - Safe	-10 to +80	°C
Excitation voltage - Recommended	10	V
Excitation voltage - Maximum	10	V
Bridge resistance	350	Ω
Insulation resistance - Minimum at 50Vdc	500	MΩ
Overload - Safe	50	% RL
Overload - Ultimate	300	% RL
Sealing - R option	IP65
Sealing - S option	IP67
Weight - Nominal (excluding cable)	0.8	kg

All standard ranges are manufactured in stainless steel.

**Structural stiffness - Nominal**
Range (kN)	Stiffness (N/m)	Range (kN)	Stiffness (N/m)	Range (kN)	Stiffness (N/m)
50	2.1 x 10¹⁰	100	4.2 x 10¹⁰

Notes

AL = Applied load.
RL = Rated load.
Temperature coefficients apply over the compensated range.
The load must be applied directly through the central loading axis.

Connections

The loadcell is fitted with 2 metres of PVC insulated 4 core screened cable type 7-2-4C.

Excitation + = Red, Excitation - = Blue, Signal + = Yellow, Signal - = Green, Screen = Orange.

The screen is not connected to the loadcell body.

**Additional Information**
Outline	Outline drawing of the product.
PDF data-sheet	Printable data-sheet. Right click on the link to download the file if you are using Internet Explorer.

Top