Novatech F216 Loadcell

Hardened stainless steel body
Standard 2 year warranty
High mechanical stiffness
Flying lead
Small size

F216 Loadcell

Geometry: Axial strain cylinder in weather sealed case, with raised end load bearing faces. For use in compression.

The F216 is ideally suited to engineering force measurements. It is designed for easy installation, usually between two flat faces bearing on its loading rings.

The small size of this loadcell makes it an ideal force sensor for mounting in existing machinery. It has been used in presses and printing machines.

We are happy to design variants of this loadcell to meet your specific requirements. Versions can be manufactured for fully compensated operation up to +250°C. Please consult our engineering department.

Details of our other loadcell families can be found in the Loadcell Specifier Guide.

**Ordering Codes**
See the loadcell ordering code sheet for more details. Add range in the required force units.
F216CFR0K0	Compression, IP65, unrationalised	F216CFR0KN	Compression, IP65, rationalised

**F216 Specification**
Parameter	Value	Unit
Non-linearity - Terminal	±0.5	% RL
Hysteresis	±0.5	% RL
Creep - 20 minutes	±0.05	% AL
Repeatability	±0.02	% RL
Rated output - Nominal	1.2	mV/V
Rated output - Rationalised	1.0	mV/V
Rationalisation tolerance	±0.5	% RL
Zero load output	±4	% RL
Temperature effect on rated output per °C	±0.005	% AL
Temperature effect on zero load output per °C	±0.03	% RL
Temperature range - Compensated	-10 to +50	°C
Temperature range - Safe	-10 to +80	°C
Excitation voltage - Recommended	10	V
Excitation voltage - Maximum	20	V
Bridge resistance	700	Ω
Insulation resistance - Minimum at 50Vdc	500	MΩ
Overload - Safe	50	% RL
Overload - Ultimate	400	% RL
Sealing	IP65
Weight - Nominal (excluding cable)	90 to 100	g

All standard ranges are manufactured in stainless steel.

**Structural stiffness - Nominal**
Range (kN)	Stiffness (N/m)	Range (kN)	Stiffness (N/m)	Range (kN)	Stiffness (N/m)
5	2.4 x 10⁸	20	9.6 x 10⁸
10	4.8 x 10⁸	40	1.9 x 10⁹

Notes

AL = Applied load.
RL = Rated load.
Temperature coefficients apply over the compensated range.
The load must be applied directly through the central loading axis.

Connections

The loadcell is fitted with 2 metres of PVC insulated 4 core screened cable type 7-2-4C.

Excitation + = Red, Excitation - = Blue, Signal + = Yellow, Signal - = Green, Screen = Orange.

The screen is not connected to the loadcell body.

**Additional Information**
Outline	Outline drawing of the product.
Stock List	Loadcells normally available for despatch within 24 hours.
PDF data-sheet	Printable data-sheet. Right click on the link to download the file.

Top